What Is Hydro Jetting?
Hydro jetting — also called pipe jetting or drain jetting — uses a specialized high-pressure water system to scour the interior walls of your septic drain lines, sewer pipes, and lateral lines. A flexible hose with a multi-directional jetting nozzle is fed into the pipe, then pressurized water (typically 1,500–4,000 PSI) is blasted forward and backward, breaking up and flushing out blockages completely.
Unlike mechanical snaking, which punches a hole through a clog and leaves residue clinging to the pipe walls, hydro jetting cleans the full circumference of the pipe — removing grease accumulation, mineral scale, sediment, roots, and debris all the way to the pipe wall. The result is a line that flows as close to new condition as possible.
Hydro Jetting vs. Jetting: Same Service, Same Power
You may hear this service called "hydro jetting," "water jetting," or simply "jetting." They all refer to the same high-pressure pipe-clearing method. We use the terms interchangeably — what matters is the result: a completely clear line, fast.
Snaking vs. Hydro Jetting — Know the Difference
⚠ Snaking Alone
- Punches through the blockage
- Leaves grease & scale on pipe walls
- Clog often returns within weeks
- Cannot remove root masses
- No cleaning of pipe interior
✓ Hydro Jetting
- Scours entire pipe circumference
- Removes grease, scale & roots
- Results last significantly longer
- Clears root intrusion thoroughly
- Pipe restored close to new condition
When Do You Need Hydro Jetting?
- Recurring clogs — If you've had the same line snaked multiple times and the blockage keeps coming back, jetting gets to the root cause
- Slow drains throughout the house — Widespread slow drains indicate buildup in the main line between the home and the septic tank
- Grease accumulation in kitchen lines — Commercial kitchens and heavily used residential kitchens build up grease faster than snaking can manage
- Root intrusion — Tree roots that have worked their way into older clay or concrete pipe joints can be shredded and cleared with high-pressure jetting
- Pre-inspection line cleaning — Clearing a line before a camera inspection gives a clearer picture of the pipe's actual condition
- After a septic pump-out — Jetting the inlet line after a pump-out can remove any backwashed solids and restore full flow
Our Hydro Jetting Process
We start with a line assessment to confirm that jetting is the right solution and that the pipe is in a condition that can withstand high-pressure cleaning. We then insert the jetting hose and work systematically through the line, clearing blockages and flushing debris toward the tank or cleanout. After jetting, we verify flow is fully restored before we leave.
We'll be upfront if we find a situation where jetting isn't appropriate — for example, severely deteriorated or collapsed pipe sections that need replacement rather than cleaning. You'll get an honest assessment before we do any work.
Hydro Jetting for Residential & Commercial Properties
We provide hydro jetting services for both residential homes and commercial properties throughout Lee County. Commercial properties — particularly restaurants, food service facilities, and multi-tenant buildings — often need jetting more frequently due to the higher volume of grease and solid waste entering drain lines.
For commercial clients, we can set up a scheduled jetting program to prevent buildup from ever becoming a serious blockage, reducing the risk of after-hours emergency calls and keeping your operation running smoothly.
Frequently Asked Questions — Hydro Jetting
Is hydro jetting safe for my pipes?
Yes — for most residential and commercial drain and septic lines in good structural condition. We assess the line before jetting. We would not recommend high-pressure jetting for severely cracked, collapsed, or deteriorated sections of pipe, and we'll tell you honestly if that's the case before any work begins.
How is hydro jetting different from snaking or augering?
A snake (or auger) is a mechanical spiral that bores through a clog and pulls it back. It clears the blockage but leaves residue clinging to the pipe walls — which is why clogs often return quickly. Hydro jetting uses pressurized water to scour the entire interior of the pipe, removing all buildup and leaving the line clean. Results last significantly longer.
Can hydro jetting remove tree roots from my pipes?
Yes. High-pressure jetting is effective at cutting through and flushing out root masses that have grown into pipe joints — a common problem in older clay and concrete lines throughout Lee County. Depending on the extent of intrusion, we may recommend a follow-up camera inspection to assess whether roots have caused structural damage to the pipe itself.
How long does hydro jetting take?
Most residential jobs take 1–2 hours depending on the length of the line, the severity of the buildup, and accessibility. Commercial or multi-line jobs may take longer. We'll give you a time estimate when we assess the job.
Do you offer hydro jetting outside of Fort Myers?
Yes — we provide hydro jetting and pipe jetting throughout all of Lee County, including Cape Coral, North Fort Myers, Lehigh Acres, Bonita Springs, Estero, and the islands. We also serve Port Charlotte and Punta Gorda in Charlotte County.
Grease & Scale Removal
Blasts away years of grease buildup and mineral scale from the full pipe circumference — not just punching a hole through the clog.
Root Intrusion Clearing
High-pressure jetting cuts through root masses that have grown into pipe joints, restoring flow without excavation.
Residential & Commercial
We jet lines for single-family homes, restaurants, retail properties, and multi-tenant buildings throughout Lee County.
Longer-Lasting Results
Because jetting cleans the entire pipe wall rather than just the clog, blockages return far less frequently than after snaking alone.
Hydro Jetting Available Across Southwest Florida
We provide pipe jetting and hydro jetting service throughout Lee County and into Charlotte County.